Comments on: Hybrid PhysX mod 1.03 available

By: Zogrim

Zogrim — Mon, 28 Jun 2010 15:42:13 +0000

has it been “fixed” as nVidia calls it?
They promised not to fix it, because of “overwhelming positive response”.
But WHQL (257.21) was fixed, yes

By: hcforde

hcforde — Mon, 28 Jun 2010 13:40:15 +0000

At this point in time does the 257.xx beta driver work or has it been “fixed” as nVidia calls it?

By: Zor1

Zor1 — Fri, 18 Jun 2010 06:42:14 +0000

Waiting 1.04 with maximum patience…before i smash up or sell EN260GTX…yesterday after installing new WHQL all physX support gone like wind, so i trying to rollout to beta, but hardware acceleration in FluidMark still don’t working… Too early was delighted that have let out new the driver with a difference in two days.

By: John

John — Wed, 16 Jun 2010 18:06:56 +0000

The new Nvidia’s 256 drivers are out! Are we going to see a new 1.04 mod by Genl?
Thank you!!

By: Schar07

Schar07 — Sat, 29 May 2010 11:38:36 +0000

Thx, ME was fixed but i have not been able in any ways to eliminate nvlddmkm.sys crashed/recovery/BSODs. Reinstalling Win7 for this isn’t worth, neither to change my Commando/E6600/RAM to try to make it work on another HW conbination. I gave up, my BFG 8800 GTX OC2 will be sold for what i can get back.

Goodbye nVidia, a wiser policy would pay back at the end i’m sure.

By: LEO

LEO — Tue, 25 May 2010 09:38:12 +0000

GenL did you tried the new nvidia driver? does your patch works fine? (sorry for my english! )

By: xDee xDee

xDee xDee — Mon, 24 May 2010 22:45:43 +0000

I can confirm that the 257.15 beta driver do work with Hybrid PhysX mod 1.03. Apparently it’s automatic. If you look in the “Manage 3D Settings” there is an option that says, “CUDA – GPUs” which if you read the description it says, “Allows you to specify which GPUs can be used by CUDA applications, including PhysX.”

I just left the ,”Adjust image settings with preview” to “Let the 3D application decide” and hardware PhysX is running just fine.

By: GenL

GenL — Sun, 16 May 2010 21:32:52 +0000

Chris
“no d3d device” means problems with your primary GPU. Make sure you installed original driver for your primary GPU and that dxdiag doesn’t detect any issues.

Schar07
Did you try to delete PhysX files from game folder? Read FAQ for more info on this.

By: Schar07

Schar07 — Sun, 16 May 2010 17:42:01 +0000

Hi tempchicken,

thanks, after a lot of trial and crashing i am now 5870+8800+GenL working..i had a flawed DRAM stick and OC was too much for this double card setup. Now i run @ 450MHz FSB (3240MHz CPU) with 2GB DRAM only and seems stable.

Mirror’s Edge is now jerky/jumpy when Physx objects enter in view and RivaTuner hw accel detection doesn’t work for the game, like if it is now engaging 3d hw accel. But FluidMark work great. Still trying to understand why this game is so picky

By: Zogrim

Zogrim — Sun, 16 May 2010 14:35:27 +0000

Rass You're talking about pure UT3 or UT3 PhysX Mod ? If second, make sure that you have proper mod applied - from Nvidia and not older one, from Ageia.