Well:Problem is simple;
Physx options are missing on nv contorl panel. Yeah classical problem but ! Now here's the reason I don t undestand what i'm encountering:
I have just replaced the motherboard.Old motherboard used:
asus Z9PE D16:
2 titan wocking on 8x 3.0 and one on 16x 3.0 and the 470 worck on 1X 1.1
-one of titan had the 1st default GPU displaying.
-With hypersli patch for SLI (1.0) compatibility (and with 331.93 and 332.21), with or without hypersli, sli and physx worked.
-Whith this configuration, no issue, physx can be set on nv panel, 470 dedicated worked great ...NOW
With supermicro X9DRX+-F
-with same windows 7, same drivers, same patch hyper sli 1.0 ...
-all titan and 470 worck on 8x3.0/2.0
-one of titan has the 1st default GPU displaying
-the SLI works fine , but physx option has totally disapeared on nv control panel.
-I have tested with beta driver, without SLI patch, on win serv 2008 r2 sp1 ...
I have never seen the physx option again ;(
I m probably not eligible because of HW trick but why ?
Is it absolutely required to turn off the titan in 16X ?
Is it possible to constrain phyx activation in driver ?
HW: If it may help:
X9DRX+-F FULL WC mini block
2x 2690 V2 oem WB's Koolance 370
256GB 16X16GB M393B2G70BH0-YK0
2X koolance 1700W rev 1.0 et 1.5
+550W pour acard's Iram's auto alimentation
+ alim lab stab hameg pour matos son.
+ ondulo 5KVA bi conversion
3X titan with (dual dvi cut) 3X aquacomputer WB
470gtx WC with EK blok
ARECA 1880IX 4G cach for: 10X 3T raid0 + 2TB en 2.5 + 2 max iops 256GB
ARECA 1231ML rev 2 4G cach for: 5X acard 9010 raid0 (96GB)
4X 9265 8i for: 12x 512 SSD
x fi titanuim HD moded
2X JVC DX1000 (one of them fully wood modded)
1 3008 wfp
2x DELL 2408WFP rev2
IB mellanox controler mono 40GB
Active Spliter pcie 4X to 4x 1X
Tell me if you need more details.